ScreenSteps

Error Codes

Updated on

LCD screen message/code Condition/solution
Paper out. Load paper.
 No paper is loaded. Load paper in the product
Paper feed error or jam
 Paper is jammed in the product. Remove the jammed paper, then press the  start button to clear the error.
Combination of IP address and subnet mask is invalid.
 There is a problem with the network connection to your product.
The printer's ink pad is at the end of its service life.
 The ink pad is at the end of its service life. Turn off the product and contact Epson for support.
The printer's ink pad is nearing the end of its service life.
 The ink pad is near the end of its service life. Contact Epson for support. (To continue printing, press the  start button.)
Communication error. Connect computer.
 Make sure the computer is connected to your product and your software is installed correctly.
Paper Configuration is disabled. Some features may not be available.
 The Paper Configuration setting must be turned on to use AirPrint.
You need to replace the following ink cartridge(s).
 Replace the ink cartridge indicated on the LCD screen.
Operation canceled. Error while saving.
 Make sure the memory card is inserted correctly and meets the specifications for your product.
Recovery mode
 An error has occurred during firmware updating. Connect your product using a USB cable and try updating the firmware again. If you still receive this error message, contact Epson for support.
Printer error. Turn power off and on again.
 A fatal error has occurred. Turn the product off and then back on again. If the error continues, check for a paper jam. If there is no paper jam, contact Epson for support.
Previous Article Epson Printer Troubleshooting Guide
Next Article Example Article for Epson Printing

Example Content

Example Conversation Flows 21
Patient Scheduling 9

Other Resources

Recently Updated Articles

More Recently Updated Articles
Still Need Help? Contact Us